`sensor-ina260`¶

CLI reference¶

glasgow run sensor-ina260¶

Measure voltage, current and power with TI INA260 sensors.

Only readout is supported. Configuration cannot be changed, and alerts cannot be enabled.

usage: glasgow run sensor-ina260 [-h] [-V SPEC] [--scl PIN] [--sda PIN]
                                 [--i2c-address ADDR]
                                 OPERATION ...

-h, --help¶: show this help message and exit

-V <spec>, --voltage <spec>¶: configure I/O port voltage to SPEC (e.g.: ‘3.3’, ‘A=5.0,B=3.3’, ‘A=SA’)

--scl <pin>¶: bind the applet I/O line ‘scl’ to PIN (default: ‘A0’, required)

--sda <pin>¶: bind the applet I/O line ‘sda’ to PIN (default: ‘A1’, required)

--i2c-address <addr>¶: I2C address of the sensor (0x40 to 0x4F, default: 0x40)

glasgow run sensor-ina260 log¶

usage: glasgow run sensor-ina260 log [-h] -i TIME DATA-LOGGER ...

-h, --help¶: show this help message and exit

-i <time>, --interval <time>¶: sample each TIME seconds

glasgow run sensor-ina260 log -i TIME csv¶

Log data to a comma-separated value (CSV) file.

usage: glasgow run sensor-ina260 log -i TIME csv [-h] [--dialect DIALECT]
                                                 CSV-FILE

csv-file¶: write data to CSV-FILE

-h, --help¶: show this help message and exit

--dialect {excel,excel-tab,unix}¶: format CSV file according to DIALECT

glasgow run sensor-ina260 log -i TIME influxdb¶

Log data to an InfluxDB 1.x endpoint over HTTP(S).

usage: glasgow run sensor-ina260 log -i TIME influxdb [-h] [-r POLICY]
                                                      [-t TAG=VALUE]
                                                      -p PRECISION
                                                      [--batch-size BATCH-SIZE]
                                                      ENDPOINT DATABASE SERIES

endpoint¶: write to endpoint URL //ENDPOINT/write

database¶: write to database DATABASE

series¶: write to measurement SERIES

-h, --help¶: show this help message and exit

-r <policy>, --retention-policy <policy>¶: write to retention policy POLICY

-t <tag=value>, --tag <tag=value>¶: attach TAG=VALUE to all data points

-p {ns,us,ms,s,m,h}, --precision {ns,us,ms,s,m,h}¶: set timestamp precision to PRECISION

--batch-size <batch-size>¶: submit data in groups of BATCH-SIZE points

glasgow run sensor-ina260 log -i TIME influxdb2¶

Log data to an InfluxDB 2.x endpoint over HTTP(S).

usage: glasgow run sensor-ina260 log -i TIME influxdb2 [-h] [-t TAG=VALUE]
                                                       -p PRECISION
                                                       [--batch-size BATCH-SIZE]
                                                       --token TOKEN
                                                       ENDPOINT ORGANIZATION
                                                       BUCKET SERIES

endpoint¶: write to endpoint URL //ENDPOINT/api/v2/write

organization¶: write to Organization ORGANIZATION (can be either the name or the id)

bucket¶: write to bucket BUCKET

series¶: write to measurement SERIES

-h, --help¶: show this help message and exit

-t <tag=value>, --tag <tag=value>¶: attach TAG=VALUE to all data points

-p {ns,us,ms,s,m,h}, --precision {ns,us,ms,s,m,h}¶: set timestamp precision to PRECISION

--batch-size <batch-size>¶: submit data in groups of BATCH-SIZE points

--token <token>¶: set the Token to use for Authentication

glasgow run sensor-ina260 log -i TIME stdout¶

Log data to standard output in a human-readable format.

usage: glasgow run sensor-ina260 log -i TIME stdout [-h]

-h, --help¶: show this help message and exit

glasgow run sensor-ina260 measure¶

usage: glasgow run sensor-ina260 measure [-h]

-h, --help¶: show this help message and exit

API reference¶

exception glasgow.applet.sensor.ina260.INA260Error¶

class glasgow.applet.sensor.ina260.INA260Interface(logger: Logger, i2c_iface: I2CControllerInterface, i2c_address: int = 0x40)¶