`control-tps6598x`¶

CLI reference¶

glasgow run control-tps6598x¶

Read and write TI TPS6598x USB PD controller registers.

usage: glasgow run control-tps6598x [-h] [-V SPEC] [--scl PIN] [--sda PIN]
                                    [--i2c-address ADDR]
                                    OPERATION ...

-h, --help¶: show this help message and exit

-V <spec>, --voltage <spec>¶: configure I/O port voltage to SPEC (e.g.: ‘3.3’, ‘A=5.0,B=3.3’, ‘A=SA’)

--scl <pin>¶: bind the applet I/O line ‘scl’ to PIN (default: ‘A0’, required)

--sda <pin>¶: bind the applet I/O line ‘sda’ to PIN (default: ‘A1’, required)

--i2c-address <addr>¶: I2C address of the controller (default: 0x38)

glasgow run control-tps6598x read-all¶

usage: glasgow run control-tps6598x read-all [-h]

-h, --help¶: show this help message and exit

glasgow run control-tps6598x read-reg¶

usage: glasgow run control-tps6598x read-reg [-h] ADDRESS

address¶: register address

-h, --help¶: show this help message and exit

glasgow run control-tps6598x write-reg¶

usage: glasgow run control-tps6598x write-reg [-h] ADDRESS DATA

address¶: register address

data¶: data to write, as hex bytes

-h, --help¶: show this help message and exit

API reference¶

class glasgow.applet.control.tps6598x.TPS6598xInterface(logger: Logger, i2c_iface: I2CControllerInterface, i2c_address: int = 0x38)¶